Audio description writing and original script example

Audio description script: write what the soundtrack leaves unseen.

Keep the picture clear without repeating the soundtrack.

An audio description script adds needed visual information to a video’s spoken and audible content. The writing task starts with what an audience already hears, then identifies the visual facts still needed to follow the piece. This guide uses a complete original adult-workshop scene, a separate description-only passage and two proposed placement windows. The scene is a written plan, not footage uploaded, audio generated or a timed result measured for this guide.

Two description windows in the original paper-pocket demonstration
Visual momentWhat the existing soundtrack suppliesDescription and proposed place
A white card marked Mira lies left of a gray paper pocket with a curved top notch.Iona has introduced herself and said what the pocket is for. Neither color, layout nor notch is named.Gap one, after the introduction: identify the card and the pocket’s notch before the insertion begins.
Iona slides the card into the pocket. Mira remains visible through the notch.The instruction asks for a readable name. Paper rustles, but that sound does not establish the final visible name.Gap two, with the insertion and before the closing instruction: describe the movement and visible result.

Identify the visual information the audience still needs

W3C WAI’s Description of Visual Information resource explains how description supplies important visual content to people who cannot adequately see a video. Its guidance considers both existing audio and the picture. The reference was checked October 30, 2026; this workshop example is original.

For this task, write three notes before drafting: what the video shows, what its existing dialogue or sounds communicate, and which remaining visual fact helps someone follow the action. A description is different from a transcript of speech or a general introduction to the topic. A note about camera framing belongs in your production plan unless that framing itself conveys something the audience needs.

The example’s purpose is modest: show how a paper pocket can hold a name card while leaving the name visible. The description needs the card, the notch and the final position. It does not need an invented reaction from the presenter or a story about the person whose name is printed on the card.

Read the complete original workshop scene and existing soundtrack

This fictional demonstration is for an adult paper-craft workshop. Iona is the adult presenter. On the table, a white card printed with the single name Mira lies to the left of an empty gray paper pocket. A curved notch cuts into the pocket’s top edge. Mira is text on the demonstration card; no person with that name is present in this scene.

The existing spoken introduction is: “I’m Iona. This paper pocket holds a workshop name card.” During the first planned gap in dialogue, Iona indicates the two materials without moving them. The card stays on the left and the empty pocket on the right. This is the proposed place for the first description passage.

Iona then says: “Keep the name easy to read.” In the second planned dialogue gap, she slides the card into the pocket. Paper rustles. The name Mira remains visible through the curved notch. She lays the assembled pocket flat on the table. This is the proposed place for the second description passage, with space for the relevant paper sound still needing review in an actual edit.

The existing closing line is: “Check the name before you pass it on.” The assembled card and pocket remain on the table. No card is handed to a visitor and no participant’s action is supplied. The spoken introduction, the two gaps and the two later lines form the complete local sequence for this exercise; they are not a recording or a set of measured timecodes.

Keep the complete description-only words separate

The following two quoted paragraphs are the complete description text for this plan, in order. “Passage one” and “Passage two” identify the writing blocks; those labels are not intended to be spoken. Keep Iona’s existing dialogue and the production notes outside this description-only copy.

Passage one: “A white card marked Mira lies to the left of a gray paper pocket. A curved notch cuts into the pocket’s top edge.”

Passage two: “Iona slides the card into the pocket. Mira stays visible in the curved notch.”

The first passage establishes the objects before the change. The second adds the movement and its visible result. It does not say the pocket was handed over, that Mira attended the workshop or that Iona feels pleased. Those claims are outside the accepted scene. Laying the finished pocket flat is recorded in the visual plan; the writing here concentrates on the readable name that the demonstration is meant to show.

Notice what the dialogue and meaningful sounds already convey

The introduction already names Iona and the pocket’s purpose. Repeating “Iona introduces a pocket for a name card” would spend words restating that speech while leaving the notch unexplained. The next instruction already asks for a readable name, but it does not tell someone who cannot see the result whether the printing remains exposed after insertion. That is the second passage’s useful addition.

The paper rustle indicates handling, but cannot by itself identify the notch or the card’s final alignment. Keep that sound in the plan as something to review alongside the words. Do not assume it must disappear under continuous narration. The table records the information each part supplies so you can judge a future edit without treating every audible event as redundant.

Describe the accepted visible action without supplying a motive. “Mira stays visible in the curved notch” names the result; “Iona proudly proves her perfect design” adds a judgment. A different scene might need a different selection of details. For this one, the final readable name matters more than a long inventory of the room or Iona’s clothing.

Fit each passage to the actual picture and available audio space

W3C WAI describes available space in the original audio and player support as factors when choosing how to provide description. A written gap is therefore a placement proposal to check, not proof that a recorded passage will fit. This guide assigns no seconds or word-count formula to either window.

For gap one, check the description with the initial materials visible and before Iona starts the insertion. For gap two, check the movement and readable result as they happen, before the closing instruction. Review the paper rustle as well as the dialogue; a description that obscures something important still needs editing. These are review goals for the proposed sequence, not observations from footage or narration already heard.

If a passage does not fit, first review which words carry the essential visual fact and how the video can accommodate them. Do not simply assume faster narration or an extra pause in an audio editor has solved the video timing. Keep the description, main soundtrack and picture available together in the workflow where you assemble the actual video. Then inspect the final version rather than accepting a planning table as completed synchronization.

Prepare narration without turning the plan into an automatic video task

For Honeyline Make audio, use the complete original or authorized words intended to be narrated. Enter the reviewed description words in Make audio, add a title, choose an available narrator and review the current controls, text validation and displayed estimate. Keep the scene outline, existing dialogue, gap labels and editing instructions out of the submitted narration unless you deliberately intend those words to be heard.

The two description blocks remain separately identified in your writing plan even if you prepare them together for narration. A blank line or a script cue does not place that narration at the right point in a video. Review the result when it exists and use an appropriate video workflow to assemble it with the original sound and picture. Any current saving or export option must be checked in the tool you use; this example establishes no file delivery or finished video.

This is an informational writing and preparation guide. It does not describe Honeyline video import, automatic visual analysis, audio ducking, synchronized mixing or accessibility certification. It has not assessed a real video’s compliance or generated media. Its completed output is a coherent description script and placement plan that still require actual production and review.

Primary audio description reference

W3C WAI guidance checked October 30, 2026; the page was updated September 17, 2024. It supports the brief definition, information-selection and production-space context. The paper-pocket scene, dialogue, description words and planning table are original. No source example or wording is reproduced.

Frequently asked questions

What is an audio description script?

It is written narration of visual information needed to understand a video when that information is not adequately supplied by its existing audio. This guide provides an original workshop example and keeps the added description separate from the presenter’s dialogue.

How is audio description different from a transcript or voiceover?

Here, Iona’s existing dialogue is one input; the added description is a different text block. It names the notch and the name remaining visible. An explanatory voiceover could instead teach the whole task. Keep those outputs distinct when deciding which words you need.

Should I describe details already explained in the dialogue?

Check what the audience already hears. Iona’s introduction supplies her name and the pocket’s purpose, so the added words focus on the initial layout and the readable name after insertion. The paper sound alone does not establish that visual result.

Where should the descriptions go in the original example?

The first passage is planned after the introduction while the card and empty pocket are visible. The second accompanies the insertion and its result, before the closing instruction. Check those proposals with the actual picture, dialogue and paper sound; no measured duration is assigned here.

Can I use Make audio to narrate my description text?

Prepare complete original or authorized spoken words and review Make audio’s current narrator, controls, validation and estimate. Keep production notes separate. Narration preparation does not automatically import a video or place the result on its timeline; assembly and timing review are separate steps.

Does this example certify that a video is accessible?

No. It is an original writing example, not an assessment of a real video, media player or finished mix. Use the linked W3C WAI resource for its fuller guidance and review the actual production with the relevant expertise and audience needs.

Finish the words, then review their place in the video.

Bring complete original or authorized spoken text to Make audio, choose an available narrator and review current controls, validation and the estimate. Video assembly and timing need a separate review.